OBD II Check Engine Auto Scanner Trouble Code Reader
This scanner is specifically designed to work with all OBD II compliant vehicles (all 1996 and newer cars & trucks that are OBD II compliant). This list isn’t all inclusive, therefore, your vehicle might as well work great with the scanner. There are a small number of 1994 and 1995 model year gasoline vehicles that are also compliant. To see if your car is OBD II compliant, please follow this simple instruction: Check the Vehicle Emissions Control Information Label which is located under the hood or by the radiator of most vehicles. If the vehicle is compliant, the label will designate “OBD II Certified” and will have a 16-pin OBDII Standard Socket. This scanner is compatible all OBDII and EODBII compliant vehicles 1996 and newer. Please Note: may not be able to retrieve all codes on some VW, Audi, and Subaru cars. This scanner is not compatible with CAN protocol.
(more…)
Featured:
June 19th, 2009 at 1:17 am
5.0 out of 5 stars
Great scanner, Better price. Read and Erase my 01 Audi 5p Q!
U380 worked as stated, great for peace of mind if you are a VAG owner. If you just need to clear MIL/CEL lights, buy this. DIY’s start here, this may have all you need.
June 19th, 2009 at 4:21 am
5.0 out of 5 stars
Nifty Money Saver
I purchased this scanner despite the bad review stating it didn’t give full codes. I’m really not a car guy but this thing will save me money.
June 19th, 2009 at 7:31 am
4.0 out of 5 stars
Simple, easy to use
I got this because the area I live in wants to inspect my car for emissions and I wanted to make sure I didn’t have problems before I took the car to the inspection station…
June 19th, 2009 at 8:08 am
5.0 out of 5 stars
very helpful good Quality
This Scanner is Very helpful and I would Strongly Recommend!!!!!!!!!!!!!!!!!!!!!! It is very easy to use also
June 19th, 2009 at 12:05 pm
4.0 out of 5 stars
Good but missing current protocol
I’ve had this unit for a few years and its worked with my 2003 Mazda MPV. We sold the MPV and bought a 2007 Toyota Sienna and this unit won’t work with the Sienna…
June 19th, 2009 at 5:30 pm
4.0 out of 5 stars
Good bang for the buck
The UIFTech U280 is a good all purpose tool that is a must for trouble shooting codes. The only shortfall that I have encountered is that the connector does not seat as well as…
June 19th, 2009 at 10:37 pm
1.0 out of 5 stars
Scanner won’t work
UIFTECH U280 scanner connector does not fit my 1996 VW Cabrio OBDII connector. Pins line up but U280 housing is a little more than 1/16th of an inch short on both ends.
June 20th, 2009 at 6:13 am
1.0 out of 5 stars
dont waste your money
i have a 2002 vw jetta, this reader will not read my vehicle. Dont waste your money.
June 20th, 2009 at 10:00 am
5.0 out of 5 stars
OBD II engine scanner
The unit worked great and for the price it is highly recomended for home use. I told every one I know that I had it so can check fault codes for them.
June 20th, 2009 at 11:06 am
5.0 out of 5 stars
A MUST HAVE
OBD 2, EOBD 2 Volkswagen / Audi / VW Auto Scanner
IT IS SO EASY TO USE. RECOMMENED TO EVERYBODY.