Argus AA300 Basic Digital Battery Tester and System Analyzer

Argus Analyzers’ AA300, powered by the patented Crank-Check and Capacity-Check technologies, delivers auto enthusiasts and service professionals fast and accurate battery performance diagnostics to identify weak batteries before they fail. The measurement of the battery’s Cold Cranking Amps (CCA) can be manually compared to the battery’s factory specified CCA providing an estimate of remaining battery life. This tool features an intuitive easy-to-use interface and a display that provides clear, graphical information on battery health, the starting system, and the alternator charging system. Argus AA300 features battery capacity diagnostics and cranking health information important to the auto enthusiast or automotive service professional. Batteries must be fully charged for accurate test results. 2 year warranty – Argus will repair or replace (at our option) defective product within the warranty period.

More »

Cylinder Leakage Tester Kit

Cylinder Leakage Tester KitQuickly diagnose internal engine problems such as bad rings, valves and leaking head gaskets. Kit come complete with adapters for most applications.Features and Benefits : Dual 2-1/2″ gauges feature chrome bezel and rugged protective outer boot. Scales read 0-100 psi and 0-700 kPa. Pressure regulated manifold includes quick couplers. Long flex 24″ 14 mm hose. 10 mm, 12 mm and 18 mm thread adapters. Blow molded hard case with removable lid. Detailed instruction chart.

More »

Compression Gauge Test Set for Engine Cylinders Diagnostic Tester

Check valves and rings, inspect for carbon buildup and late timing.

* Adapters for a wide number of vehicles (spark plug types/depths)
* Kit includes 2 rubber cones ends for quick check (no need to thread into head)
* 3″ Gauge has dual color scale with 0-300 PSI, 0-20 kPa
* Gauge will hold pressure values and has quick push button release valve
* Fittings: M10, M12, M14, M18 (Male, With O Ring)
* Includes 14mm and 18mm spark plug adapters
* Includes use manual with technical support

Comes with 1/2″ diameter x 20″ extension hose, straight and angled fittings, rubberized gauge protector and a blow mold case.

More »

Stant 12270 30 Pound Cooling System and Pressure Cap Tester

The Stant Cooling System and Pressure Cap tester allows you to test today’s cars higher pressure cooling systems and pressure caps up to 30 pounds. The gauge includes new cap testing pressure ranges of 17-19 pounds, 20 pounds and 28-30 pounds. The larger color coded dial makes it easy to accurately test these higher pressure caps and systems. The Cooling System and Pressure Cap tester head also includes a pressure release bar that, when turned clockwise, releases pressure buildup before removing the head from the neck. The Stant pressure tester comes in its own plastic carrying case with, one (1) 12559 spacer to drop in 1 inch deep filler necks for testing, one (1) 12552 cap adaptor to check standard “A” size caps, and, a complete easy to use instruction manual.

More »

Actron CP7818 Fuel Pressure Tester Kit

This fuel pressure tester diagnoses drivability problems caused by poor fuel pressure. It works on makes and models with schrader valve test port on the fuel rail. This fuel pressure tester features a relief button and 6-ft hose for safely disposing of gasoline and repeating tests without disconnecting gauge. It also works on throttle body injection with threaded connection at fuel filter or throttle body. It includes comprehensive user manual with illustrated step-by-step automotive test procedures and has 1 year warranty.

More »

Solar 12 Volt Electronic Battery Tester (SOLBA5) Category: Battery and Alternator Load Testers

Item #: SOLBA5. Features and BenefitsTests multiple battery types, including Conventional, Maintenance Free, AGM, Gel Cell, Marine and Deep Cycle batteriesTests against multiple battery ratings, including CCA, CA, JIS, DIN, IEC, ENOperating Range: 100 – 1200 CCA (< +/-10% Tolerance); 7V-15VBright 4 digit LED display is great for bright or low light settingsSafety features include reverse polarity and over-voltage protectionThis pocket sized 12 volt battery tester is small, portable and easy to use. Easy-to use tester also provides LED results of battery condition. Includes 20" test leads and one year limited warranty. Customers also search for: Tools and Storage\Automotive\Shop Tools and Equipment\Battery and Alternator Load Testers Discount Solar 12 Volt Electronic Battery Tester, Buy Solar 12 Volt Electronic Battery Tester, Wholesale Solar 12 Volt Electronic Battery Tester, 010271021741, BA5Battery and Alternator Load Testers

More »

OTC 7991 Universal Cooling System Pressure Tester

Cooling System Pressure TesterNow you can pressure test the cooling system on most cars, light commercial trucks, motorcycles, and even marine applications. The tester`s universal fit eliminates the need for multiple adapters. Includes pump, control valve and bladder components. NOTE: Will not work on Saturn and Kia cars or Jeep with the plastic reservoir. Weight: 3 lbs, 2 oz

More »

Mityvac 5530 Professional Compression Tester Kit

Mityvac professional compression tester kit if a full coverage kit for automotive, industrial, marine, and small engines. It features a hold quick connector which allows the user to attach the air supply to valve stem seal replacement without removal of the cylinder head.

More »

Electronic Specialties 302M Fuse Buddy Tester

Electronic Specialties Fuse Buddy Tester is designed to test the circuit and connect directly into the fuse socket as well as test range measures from 0 to 20 amp. It eliminates clumsy connections and removed fuse is plugged into the fuse buddy maintaining circuit protection. This tester is great for diagnostic troubleshooting and parasitic drains.

More »

Calibrated Ignition Tester – Standard Systems

Features: Accurately check for spark in ignition systems without removing spark plug from engine. Tester verifies that energy is sufficient for spark plug to fire. Attach spark plug wire to tester end. Clamp tester to engine as ground. Crank engine and check for spark. KD 2757 Standard Ignition Tester is calibrated for Standard Ignition Systems, while is calibrated for High-Energy Systems.Caution: Wear eye protection.

More »